How to Run CNC Programs Off a PCMCIA Card
Setting the CNC PCMCIA Card
1
Turn off the "CNC" machine, and insert the "PCMCIA" card in the slot next to the LCD screen.
2
Turn on the "CNC" machine, and enable the "Parameter Write" option.
3
Set the "NC" parameter number to 20 to 4, then disable the "Parameter Write" option.
4
Turn off the "CNC" machine, and remove the "PCMCIA" card from the slot.
Loading Programs from the PCMCIA Card
5
Select "Edit Mode" from the Main menu.
6
Select "Head 1," if control has only one side or "Head 2," when control has two sides.
7
Press the "Prog" hard key, then the "Dir" soft key.
8
Press the "Oprt" soft key, then the "Right" arrow soft key.
9
Type "O-9999" to output all the selected programs or type "O-XXXX," where XXXX is the program's number. Press the "Punch" soft key and the "Exec" soft key, then the word "Output" should appear in the corner of the LCD screen.
